COMPLETELY REDESIGNED for added accuracy and efficiency, our popular Model G1014Z offers an all-new quick release for lightening-fast belt changes and a convenient, single knob tracking control system. Still sized to fit the mid to large scale workshop, the G1014Z offers a single-phase, 3/4 HP motor, shielded bearings on both belt rollers, heavy cast iron table and body, 2″ dust port and a rock-solid, A-frame stand.
Features Hitachi Power Tools introduces the all new SB10Y 4 x 8 inch Belt Disc Benchtop Sander with on-board dust collection. Belt is 4 x 36 inches and can be used in the horizontal position or locked in vertical position. Changing the abrasive belt is easy and fast by removing the side cover and releasing the belt tension control. Belt tracking adjustments are simple too using the thumb wheel. The belt platen area is 5 x 9 inches when using the workstop. Belt speed is 1850 Feet per Minute. The belt assembly also features an idler drum for contour sanding. The disc is 8 inches in diameter with a speed of 3000 RPM. The 6 x 9 inch cast iron table tilts up to 45 degrees with a scale showing angle of tilt; table can be used with either the belt or disc, and includes a miter gauge slot with miter gauge. On-board dust collection system pulls sawdust from the belt and disc areas and deposits it into a 30 micron bag with zipper for easy disposal of sawdust. Powered by a 1/3 HP, 5.5 amp induction motor. Footprint (inches): 10 width x 17 depth (with belt in upright position). Motor: 1/3 HP, 5.5 amp, continuous duty, induction-type, 120v, 60 Hz, 3450 RPM Belt 4 x 36 in, Platen 5 x 9 in, Speed 1850 FPM, Easy belt change and tracking Disc 8 in dia, balanced, PSA abrasive, 3000 RPM Table 6 x 9 in, cast iron, 45 degree tilt Includes: Table assembly, Miter gauge, Dust collection bag, Abrasives – 1 PSA cloth disc 8in 100 grit; 1 cloth belt 4 x 8in 100 grit
An excellent machine for schools, hobbyists or in shops where space is a premium. This combination sander offers the convenience and cutting power of a big 8″ sanding disc, plus a narrow, 1″ wide belt for finishing intricate details. This belt can be fed through a hole for sanding inside surfaces. Spring-loaded arm keeps tension on belt, and both tables tilt for maximum working flexibility. Features powder coated paint and a powerful 1/2 HP, 110V, all ball bearing motor. Approximate shipping weight: 55lbs.
You’ve got a bench grinder but no belt and disc grinding attachment. What are you going to do? Here’s a thought: the Blue-Point MLT100 Multitool Belt and Disc Grinding Attachment. Even better, it attaches easily to all popular brands of 6″ (150mm) and 8″ (200mm) bench grinders with bolt-on wheel guards and a minimum 1/3 horsepower.
Built to the scale and level of quality professional woodworkers demand, this heavy-duty sander features a 6″ x 48″ sanding belt that operates horizontally, vertically or at any angle in between. Both table supports tilt for any job.
Cam spring belt tensioning – Belt Tracking: Yes – Belt table tilt Range: 0 ~ 90 – Disc table Size: 8 7/8 (in) x 6 1/4 (in) – Table Material: Aluminum – Disc table tilt Range: 0 ~ 45 – C UL Listed
Heavy cast iron base with rubber feet for stability Handy belt tracking knob 4″ x 36″ sanding belt can be positioned at any angle from 0 degrees to 90 degrees Belt runs at 2000 SF/M, great for hard or soft woods, end of belt can be used for contour sanding 6″ sanding disk rotates to 3100 RPM, Manufacturer: Fisch
Brand New 8 ” Sanding Disc
This stationary bench top Combo Sander offers all the power and control you need for sanding smaller workpieces for less than the cost of a portable belt sander. Compact design is great for the smaller workshop. Other features: single knob tracking; 2-1/2″ dust ports for belt and disc; belt platen rotation of 0-90 degrees; approximate shipping weight of 38 lbs.
Belt/Disc Combo Sander, Powerful 5.2A Motor For Long Lasting Performance, Tilting Die Cast Aluminum Table For Bevel Sanding, 4″ Belt Can Operate Vertically Or Horizontally For Multiple Uses, Dust Extraction Port Easily Connects To A Vacuum Hose For Dust Collection, Specifications: Amps 5.2A, SFPM 2000, Belt Size 4″ x 36″, Disk Size 6″, Includes: Belt/Disc Sander, Tilting Table, Back Stop, Sanding Belt & Disc, Miter Gauge, Hex Wrenches, 2 Year Warranty.
1-1/2 hp, single-phase, 115/230-volt motor Belt operates horizontally and vertically 12-1/2-by-7-inch belt table 16-1/2-inch-by-10-inch disc table Two-year warranty, Manufacturer: JET
Includes 6″ Belt/12″ Disc Three Phase Finishing Machine – 31-735B, 1-1/2 HP, 200-230/460 Volt, 60 Hz, 3,450 RPM Three Phase TEFC Motor, 24 Volt Push-Button Station, Magnetic Starter, Transformer, 3-Leg Overload Protection (LVC), 4-1/2″ Arbor Pulley, Guard for Arbor Pulley, V-Belt, 80-Grit Aluminum Oxide Belt, 50-Grit Aluminum Oxide Disc.