For edge banding pre-glued tapes. Features quick heat up time, thermostat, wood handle and heat resistant base.
4″ Angle Grinder features: ,On/Off switch ,Double insulated motor ,Lightweight ,Locking spindle button for easy disc changes ,11,000 RPM ,10 x 1.5mm arbor ,Includes side handle and wrench ,Weighs 4.12 lbs.
, Manufacturer: Grizzly
, Manufacturer: Grizzly
This machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continued downward pressure on extremely thin stock as short as 8 1/2″. That is the distance between the first infeed and first outfeed pressure roller. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. What follows is that you get perfectly parallel sanding in any thickness of stock. It includes features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo-electric eye / pneumatic control belt oscillation and separate motors for the drum, the feed rollers and the table elevation.
We’ve combined the precision of an Oscillating Spindle Sander and a 12″ Disc Sander for the ultimate and most useful combination sander on the market today. The Spindle Sander features 4 spindle sizes, which utilize sleeves of sandpaper for easy changing. Other features include: overall height of 47″; stroke length of 1″; formed and welded steel stand; lubricated for life ball bearings; miter gauge; two 2″ dust ports; powder coated paint; approximate shipping weight of 180 lbs.
If you have one of our Model G1095, G1096, G1132, G1134, G4181 or G7873 Power Feeders you can save money over the long haul by replacing the rollers with one of these roller flange and tire systems. Once you buy the complete flange and tire system, you simply replace the inexpensive rubber or polyurethane tires when they wear out. Polyurethane tires are even more economical since they last up to six times longer than rubber. Many of the new units we are bringing on come with this replaceable assembly. Roller size: 4 3/4″ x 2 1/4″, Includes flange and roller
This is one of our top sellers and for good reason. We have been selling this unit for years and it has proven itself in thousands of shops around the country. We have now added a 2.5 micron top bag as standard equipment to capture the fine dust particles that normally end up all over your shop. We buy these units in huge quantities with no middleman and pass the savings on to you.Other features include: 12″ balanced steel impeller with radial fin; 5.4 cubic foot bag capacity; portable base dimensions of 21-1/4″ x 33-1/2″; 19″ x 33″ (diameter x depth) bag size (x2); powder coated paint; 78″ height with bags inflated; approximate shipping weight of 123 lbs.
This is a sophisticated Tapping Machine with all the features you’d expect, like auto-reverse, precision collet set for taps, foot pedal control, massive construction and 2 HP of brute force! It also is a precision drill press, too! It has nine spindle speeds, a swing of 18″ and 5 1/8″ of spindle stroke. Without a doubt, this is a great buy all around.
This is the big brother for the surface grinder to the left, but with more capacity. Heavy castings, smooth operation and dependable precision are built into this well-made unit. Check out the specs below and you will see this is an incredible value for a machine of this quality.
Precision, versatility and high quality in a small package are what you get with our new G0516 Lathe Mill Combo. The 6 speed lathe includes big machine features like a 4-way turret tool post, cuts both metric and inch threads, see-through eye shield, 3/4 HP motor and a 9 3/4″ swing. The milling head features its own 1/2 HP variable speed motor, tilting column, MT#3 spindle taper and 8″ of vertical travel. It bolts onto the back of the bed and is sturdy and versatile. This is an exceptional value and will make a great addition to any shop.
We mean exactly what we say: this planer is for extreme duty! This machine is solidly built weighing a massive 1700 pounds, with power up/down control for the table and variable speed fee. And there’s more! The bed rollers on this machine are power driven and adjustable for height when planing rough-cut lumber. Segmented chip breakers and four knife cutterhead means you get the best possible finish. Check out the impressive features below, and you’ll agree that this workhorse is a great investment.